Filter
Top Products
57
This manual contains information on products and accessories
available at the time of printing. To obtain compatibility information
for products not contained in this manual, contact a Konica Minolta
service facility.
ABOUT FLASH METERING
The metering mode switches automatically for both the built-in and
accessory flash depending on the lens in use:
ADI Flash Metering - when using D series lenses. ADI (Advanced
Distance Integration) metering uses the distance information from D
series lenses in addition to Pre-flash TTL metering to control the
exposure. This metering system is less influenced by background
conditions or the subject’s reflectance.
Pre-flash TTL Flash Metering - when using non-D series lenses.
Pre-flash TTL (Through The Lens) flash metering system controls
the flash during the exposure automatically.