Filter
Top Products
Changing the Batteries - Quartz-date Model
GETTING
STARTED
2120
Turn the main switch to ON.
• A battery icon appears on the data
panel indicating the power status of
the batteries.
• For owners of the quartz-date
model, the date settings will blink if
not set. Set the date settings
(p.100) or press the program-reset
button to display the power status.
Steady
• Power is sufficient for all camera operations.
Blinks
• Power is low. All functions are operational, but
the batteries will need to be replaced soon.
Flash recycling time may be slow.
Blinks ( no other displays appear )
• Power is insufficient for camera operation and
the shutter is locked. Replace the batteries.
• If the data panel is blank, the batteries may be dead or installed
incorrectly.
• Occasionally, the battery-condition indicator will give a false low-battery-
power warning , even though there is enough power capacity. Turn
the main switch on and off a few times to reset the display.
Battery condition indicators shows the level of battery
power.
Battery Condition Indicators
Turn the camera on and off.
•The camera stores the current date and
time in a memory register each time the
camera is turned off or on.
Change the batteries as described on page 19. Turn the
camera on.
• Either of the following display appears on the data panel.
Press the select button.
• The stored date and time settings will
appear on the display.
BATTERIES
2
When the batteries have been removed, the camera’s built-in clock will
stop. The following procedure stores the current time and date in case
the clock and calendar reset when the batteries are removed.
3
• If normal display appears on the data panel, the clock and
calendar did not reset and the camera can be used. Step 3
and 4 are not necessary.
Reset the clock if necessary.
• Refer to the page 100 for detailed
instructions.
4
1