Konica Minolta DYNAX 3 Digital Camera User Manual


 
CREATIVE
EXPOSURE
5958
While pressing the
function button , turn the
control dial until S appears
on the data panel.
In S mode, you select the shutter speed and the camera automatically
sets the aperture required for proper exposure. Use S mode when you
want to control the blur caused by subject movement or the stop the
motion of the subject.
Turn the function dial to .
S MODE – SHUTTER PRIORITY
Release the function button. Turn the control dial to
select the shutter speed.
The shutter speed range is from 1/2000 to 30 seconds.
If the aperture display blinks,
the shutter speed is outside
the aperture range of the
lens. Turn the control dial
until the blinking stops.
Fractions of a second are
displayed without a
numerator. The number 90
displayed stands for
1/90th of a second.
“ indicates full
seconds. 2” is two
seconds.
3
1
2
Press the flash-mode button
to pop-up the built-in flash.
will appear on the data panel.
Push the built-in flash down or turn the accessory flash off.
will be displayed on the data panel.
Flash with S Mode
Canceling the Flash
In S mode, the flash will not fire automatically. When you want to use
the flash, pop-up the built-in flash or attach an accessory flash.
1
Turn the control dial to select
the shutter speed.
The maximum shutter speed is 1/90
sec
when using flash.
The camera automatically sets the
aperture for the selected shutter
speed.
With larger aperture numbers (smaller
lens opening), the subject will be out of
flash range. The use of smaller
aperture numbers (larger lens opening)
is recommended. See the flash range
(p. 36).
2
Control dial