Konica Minolta DYNAX 3 Digital Camera User Manual


 
CREATIVE
EXPOSURE
60 61
M MODE – MANUAL
To select the shutter speed,
turn the control dial .
The shutter-speed range is from
1/2000 to 30 seconds.
To select the aperture, turn
the control dial while
pressing the exposure-
compensation button.
The aperture range depends on the
lens.
M mode gives you full control over exposure. The exposure-
compensation indicator displays the difference between your shutter
speed and aperture settings and the exposure determined by the
camera’s metering system.
3
Turn the function dial to .
1
While pressing the function
button, turn the control dial
until M appears on the data
panel. Release the function
button.
2
4
Exposure-
compensation
button
Control dial
Continued on next page
If an exposure-compensation indicator does not
appear, your settings agree with the exposure
determined by the camera.
The exposure will overexpose your subject.
The exposure will underexpose your subject.
Metering in Manual Mode
Any changes with exposure-compensation is canceled temporarily in M
mode. If exposure compensation was set before switching to M mode, it
will be reapplied when the exposure mode is changed back to another
mode.
In M mode, the exposure-compensation indicator in the viewfinder and
on the data panel indicates if the set exposure is greater or less than
exposure determined by the camera’s metering system.