DETAILED
OPERATION
79
Set the shutter speed to bulb when you
want to take time exposures. When
bulb is selected, the shutter remains
open as long as the shutter-release
button is pressed. The camera’s
exposure meter does not work with
bulb.
Mount the camera on a
tripod. Set the camera to M
mode (p.60).
Turn the control dial
counterclockwise until
appears on the data
panel.
1
2
TAKING TIME EXPOSURES (buLb)
Continued on next page
78
While pressing the spot-AE
lock button, recompose the
scene.
3
While still pressing the spot-
AE lock button, press the
shutter-release button all the
way down to take the
picture.
• If the spot-AE lock button is not released after taking the picture, the
exposure setting will remain locked.
• Slow-sync is activated when appears in the viewfinder (p.94).
Custom Function Notes
Cust-10: Spot-AE lock: activated when the spot-AE lock button is pressed and
held (1), or activated when the button is pressed once and then canceled when
it is pressed again (2) (p.110).
4
Spot-AE lock button
EXPOSURE – AE-LOCK