Filter
Top Products
English
V
ID
E
O
IN
VIDEO PORT
TV
16
Viewing Pictures
Show off your pictures to an audience by connecting your camera to a TV. This section
shows you how to properly connect the camera to a TV and display your pictures on
TV.
Using the Camera in TV Mode
Set the camera to TV Mode when you want to use a TV to view the pictures you
have taken or when you want to erase pictures from the camera memory.
TV Function Contorls
While in TV mode, use the 4-Way Toggle Controls located on the front of the camera to
set the TV standard, advance forward or backward when viewing pictures, and to erase
pictures.
For details on erasing pictures, see page 25.
Viewing Pictures on your TV
Set the camera to TV Mode when you
want to use a TV to view the pictures you have
taken.
Connecting the Camera to your TV
Use the video cable that comes with the pack-
age to connect the camera to a TV.
1. Connect one end of the video cable to the
video port on the camera.
2. Connect the other end of the cable to the
video input socket of your TV (normally at
the back).
Press to set the
TV standard
NTSC
Standard
Press to go
backward and view
the previous picture
Press to enable
Erase mode
Note
Press to go forward
and view the next
picture
PAL
Standard