Filter
Top Products
English
23
Note
For details on erasing recorded audio, see page
25 .
Recording Audio
1. Set the camera to Audio mode .
2. Press the AUDIO REC/PLAY button to enter
Audio Record Mode, the RECORD will ap-
pear in the LCD panel
3. Press the Shutter Release button to start
recording.
4. If you are recording your own voice, speak
to the microphone on the front of the
camera. Or, if you are recording interviews,
meetings or lectures, place the camera in a
location where audio can be recorded. Make
sure that the microphone is facing the
speaker to get a clear recording.
5.To pause the recording, press the Shutter Re-
lease button.
6.To continue recording on the same track,
press the Shutter Release button again.
7.To stop recording, press the Erase/Stop but-
ton located on the front of the camera.
3
If you keep on pressing the Shutter Release but-
ton in between recordings, audio will always be
recorded on the same track. Make sure you press
the Stop button when you want to end an audio
segment and do a new recording on the next
track.
Note
LCD Panel in Audio ModeLCD Panel in Audio Mode
LCD Panel in Audio ModeLCD Panel in Audio Mode
LCD Panel in Audio Mode
Audio Recording
mode
Battery Power
Audio Track
Number
1
5
6
2
4
7