Filter
Top Products
100
Taking Still Images with Sound
Using the Set-up Menu (Cont’d)
1. Select “ADD REC SET”, press ̈ and the
settings screen will appear.
Using ̄ or ̆, select the desired setting and
press either ̈ or the MENU/SET button.
The setting is completed and you will return
to the set-up menu.
• If you press ̇, the setting is invalidated and you
return to the Set-up menu.
For the Choose-to-Record Setting (“IF SELECTED”)
This is the normal (default) mode. By using the REC menu (p.57) or the PLAY menu
(p.91) to select “ADD REC”, you can add sound to still images after they’ve been taken.
For the Always-ON Setting (“ALWAYS”)
You can add sound to every still image you take. Every time an image is taken, once
recording finishes, the After Recording screen is displayed, as Step 2 on page 57, so
by simply pressing the shutter, you can record sound. The maximum recording time is
about 30 seconds. During recording, the elapsed time is displayed on the upper right
corner of the image. When time runs out, the recording stops automatically. If you wish
to stop during a recording, press the shutter button again.
1