Filter
Top Products
102
Setting the AE-Lock to “ON”
If you press ̆ while activating focus lock (pressing the shutter button
half-way on page 34), the exposure setting locks and the AE lock icon
appears on the LCD monitor. The setting becomes effective even after
you take a shot.
* To cancel the AE-lock, turn the camera’s power OFF, press the Zoom, MENU/
SET, ̇, or PLAY button, or change the white balance setting.
• You can also set the sequence shooting to on or off. If you set it to on, this
feature lets you take a sequence shot by holding down the shutter button.
* If you are taking photos with the flash, make sure that the flash is fully charged
before taking next photo.
Using the Set-up Menu (Cont’d)
1. Select “CUSTOM” and press ̈. The settings
screen appears. Select the desired setting
with ̄ or ̆, and press either ̈ or the
MENU/SET button.
2. In screen 1, select “FLASH” and press ̈.
The flash mode settings screen appears.
Select the desired mode with ̄ or ̆, and
press either ̈ or the MENU/SET button to
change the setting. When the setting is
completed, press ̇ to return to screen 1.
1
2