Konica Minolta VECTISS100 Film Camera User Manual


 
75
ACCESSORY INFORMATION
74
This camera is designed to work specifically with lenses, and
accessories manufactured and distributed by Minolta. Using
incompatible accessories with this camera may result in
unsatisfactory performance or damage the camera and
accessories.
Lenses
All V-series lenses can be used with this camera.
Lens Hood
Use a lens hood to reduce flare and ensure maximum image
quality.
Remove the lens hood before using the cameras built-in flash.
To attach a bayonet mount lens hood, fit the lens hood
into the bayonet mount on the end of the lens barrel,
then turn the lens hood clockwise until it stops.
If your lens and lens hood
have guide marks, align the
red line on the lens hood
with the red line on the lens,
then turn the lens hood
clockwise until the dot on
the lens hood is lined up
with the line on the lens.
To store the lens hood, reverse it, attach it to the lens, then
replace the lens cap.
SPECIFICATIONS for the V LENS 28-56mm f/4–5.6
Construction 7 elements/7 groups
Angle of View 34° 10’– 63° 20
Minimum Focus Distance 0.35 m (5.5 in.)
Maximum Magnification 0.18X
Minimum f-stop f/32
Filter Diameter 40.5 mm
Dimensions Ø59 x 52 mm
Weight 115 g
The specifications are based on the latest information available
at the time of printing and are subject to change without notice.
Flashes
Minolta flashes 3500xi, 5400HS, and 5400xi are compatible
in wireless/remote flash mode only (see pages 66 - 69).
Other accessory flashes cannot be used on this camera.
This manual contains information regarding products
introduced before May, 1997. To obtain compatibility
information for products released after this date, contact the
nearest authorized Minolta Service Facility.