Konica Minolta VECTISS100 Film Camera User Manual


 
77
CARE AND STORAGE
76
Cleaning
If the camera or lens barrel is dirty,
wipe it gently with a soft, clean, dry
cloth. If the camera or lens comes in
contact with sand, gently blow away
loose particles - wiping may scratch
the surface.
To clean the lens surface, first brush away any dust or sand
then, if necessary, moisten a lens tissue with lens cleaning
fluid and gently wipe the lens in a circular motion, starting
from the center.
Never place lens fluid directly on the lens.
Never touch the interior of the camera, especially the
shutter and mirror, doing so may impair their alignment and
movement. Dust on the mirror will not affect the picture
quality.
Never use compressed air to clean the cameras interior, it
may cause damage to sensitive interior parts.
Never use organic solvents to clean the
camera.
Never touch the lens surface with your
fingers.
Storage
When storing your camera for extended periods,
Always attach the protective caps.
Store in a cool, dry, and well-ventilated area away from dust
and chemicals such as moth balls. For long periods, place
the camera in an airtight container with a silica gel drying
agent.
Periodically release the cameras shutter to keep it
operating properly.
Before using after prolonged storage, check the cameras
operation to make sure it is functioning properly.
Before Important Events
Check the cameras operation carefully, or take test
photographs.
Minolta is not responsible for any loss that may occur due to
an equipment malfunction.
Questions and Service
If you have questions about your camera, contact your local
camera dealer or write to the Minolta distributor in your
area.
Before shipping your camera for repair, please contact an
authorized Minolta Service Facility for details.
This mark certifies that this product meets the
requirements of the EU (European Union) concerning
interference causing equipment regulations. CE stands
for Conformité Européenne (European Conformity).