Filter
Top Products
2-20
2
Basic Operations
• You do not need to install the USB drivers on a Macintosh computer. Connect the USB
cable without installing any drivers.
• To view images on your Macintosh, you must have image-viewing software already
installed. (To play movies, QuickTime 4.1 or later must be installed.)
• To view movies that have a large number of pixels or a high frame rate, first copy the
movie to your PC and then play the copy of the movie. If you use your PC to play back a
movie that is stored on a memory card loaded in the camera, the data transfer rate may be
too slow for the movie to play smoothly.
• You cannot check images on your Macintosh unless there is a memory card in the camera.
Connecting to a Macintosh
Viewing images on a Macintosh computer
1
Load the memory card into the
camera. ( p.1-3)
2
Connect the AC adapter to the
camera.
3
Connect the camera to your
Macintosh using the dedicated USB
cable and then start up the
Macintosh.
• Check the size of the USB connectors. The small
connector plugs into the camera and the large
connector plugs into the USB port on your
Macintosh.