2-2
2
Basic Operations
Taking Pictures
—
Shooting Still Images
1 Take the camera out of the case.
2 Hold the camera in both hands.
3 Press the POWER button
H
to
switch the camera on and then
press
O
or
Q
on the mode
button until the “
C
” icon lights on
the mode select LED.
After the startup screen, the date is displayed for
roughly 3 seconds. Check that the date is correct.
4 With the LCD monitor facing
towards you, gently turn the left
side of the camera (lens unit).
Holding the LCD monitor at a good angle for
viewing, twist the lens unit until the lens points at
the subject.
5 Use the LCD monitor to compose
your shot.
Finecam_E.book Page 2 Thursday, August 28, 2003 6:21 PM