Filter
Top Products
4-15
4
Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode
Applicable mode:
C
/
N
This setting enables you to take pictures in which the subject’s outline is sharpened or softened.
• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
[SHARPNESS]
Enhancing the image outlines
1 Switch the camera on and press
O
or
Q
on the mode
button until the “
C
” or “
N
” icon lights on the mode select
LED.
2 Press the MENU button
K
to display the menu icons.
3 Use
L
or
R
on the 4-way button to select
SET DETAILS [ ] and then press the OK
button
E
.
4 Press
U
or
D
on the 4-way button to select
[SHARPNESS] and then press
R
.
5 Press
U
or
D
on the 4-way button to select
the desired sharpness and then press the
OK button
E
.
[ +3] +3 Sharper outlines
[+2] +2
[+1] +1
[No icon] STANDARD (default)
[ –1] –1 Softer outlines
6 Press the MENU button
K
to clear the menu.
7 The selected setting ([ +1], etc.) appears on
the LCD monitor.
Finecam_E.book Page 15 Thursday, August 28, 2003 6:21 PM