Additional Information
147
Troubleshooting
Symptom
Displaying the recorded
date, date search function
does not work.
The new sound now being
added, or that has been
added to the recorded tape
is not heard.
The title is not displayed.
The sound is muted or
images do not appear when
monitoring images through
TV.
In the recording and playback modes
Symptom
The power does not turn on.
The end search function
does not work.
The end search function
does not work correctly.
The picture does not appear
in the viewfinder.
The battery pack is quickly
discharged.
The battery remaining
indicator does not indicate
the correct time.
Cause and/or Corrective Actions
•The tape has no cassette memory.
c Use a tape with cassette memory. (p. 67, 142)
•CM SEARCH is set to OFF in the menu settings.
c Set it to ON. (p. 104)
•The tape has a blank portion in the recorded portion. (p. 68)
•AUDIO MIX is set to the CH1/2 side in the menu settings.
c Set it to the side you want to monitor. (p. 104)
•TITLE DSPL is set to OFF in the menu settings.
c Set it to ON. (p. 104)
c Pull out the A/V connecting cable from the AUDIO CH1/
CH2 and VIDEO jacks, then connect it again.
Cause and/or Corrective Actions
•The battery pack is not installed, or is dead or nearly dead.
c Install a charged battery pack. (p. 10, 11)
•The AC power adaptor is not connected to a wall outlet.
c Connect the AC power adaptor to a wall outlet. (p. 14)
•The tape was ejected after recording when using a tape
without cassette memory. (p. 25, 29)
•You have not recorded on the new cassette yet. (p. 25, 29)
•The tape has a blank portion in the beginning or middle.
(p. 25)
•The LCD panel is open.
c Close the LCD panel. (p. 18)
•The operating temperature is too low.
•The battery pack is not fully charged.
c Charge the battery pack fully. (p. 11)
•The battery pack is completely dead, and cannot be
recharged.
c Replace with a new battery pack. (p. 10)
•You have used the battery pack in an extremely hot or cold
environment for a long time.
•The battery pack is completely dead, and cannot be
recharged.
c Replace with a new battery pack. (p. 10)
•The battery is dead.
c Use a full-charged battery pack. (p. 10, 11)
(continued on the following page)