Filter
Top Products
DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
26Feature Operation
To place a call on hold, perform the following:
1. While on an active call, press the
HOLD button.
■ The On Hold lamp at the call appearance button goes on.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The Position Available lamp goes on.
■ The console returns to the normal operating mode.
To return to a held call, perform the following:
1. Press the call appearance button where the call is held.
■ The On Hold lamp at the call appearance button goes off.
■ The call appearance lamp goes on.
■ The Position Available lamp goes off.
■ The person who was on hold is reconnected to the console.
■ The person’s name (if available) and extension are displayed.
2. To end the call, press the
RELEASE button.
■ You are disconnected from the call.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The Position Available lamp goes on.
■ The console returns to the normal operating mode.
NOTE:
When the On Hold lamp flashes, it indicates that the hold time has
expired. When this happens, the console also beeps to indicate that a
call needs attention. Press the call appearance button and answer the
call.
Integrated Directory
The Integrated Directory feature allows you to find user extension numbers listed
in the switch’s on-line directory. The directory contains an alphabetical listing of
names and numbers.
NOTE:
This feature is available only when the names are entered via a Property
Management System (PMS) or through switch administration.
230890_3.bk Page 26 Tuesday, April 20, 1999 12:57 PM