Lucent Technologies Release 7 Security Camera User Manual


 
DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
33Feature Operation
3. Press the START button.
You hear a dial tone.
The Serial Call lamp goes off.
The Split lamp goes on.
4. Dial the number for the person to whom you want to transfer the call.
You hear a ringback tone.
The display shows the extension you are calling.
5. Press the
RELEASE button as soon as the call starts ringing.
The calling person is connected to the ringing phone line.
You are disconnected from the call.
The Split lamp goes off.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
6. When the called person hangs up on the calling person, the calling person
is automatically routed back to the console.
You hear a 1-burst repetitive ring.
The display identifies the incoming call as a serial call:
The Position Available lamp goes off.
The call appearance lamp flashes.
7. Answer the recall.
You are reconnected to the caller.
The call appearance lamp stops flashing, but remains on.
The Serial Call lamp goes on.
8. Transfer the caller to the next person by repeating Steps 3 through 5.
The Serial Call feature remains activated until the trunk drops from the switch or
you cancel the feature manually by pressing the
SERIAL CALL
button.
a= co to front desk sc
230890_3.bk Page 33 Tuesday, April 20, 1999 12:57 PM