Filter
Top Products
Removing the Lens
1. Push the Cocking Lever of the camera
body completely down, which will set the
mirror and cock the lens shutter.
2. Rotate the Bayonet Ring of the lens
counterclockwise as far as it will go (the
white dot on Bayonet Ring will align with
central red index line of lens) and remove
the lens.
• If you try to rotate the Bayonet Ring
counterclockwise without first depressing
the Cocking Lever of the camera body, the
movement of the ring will be blocked,
making it impossible to remove the lens.
This safety feature assures that the mirror
must always be lowered whenever the lens
is removed, thereby assisting the Light
Baffle in shielding the film from light.
To release the shutter on a lens which has
been removed from the camera body, rotate
the shutter cocking pins “B” clockwise as far
as they will go, while depressing the shutter
lock pin “A”.
13
CAUTION:
When attaching/removing the lens, be sure
not to rest the camera on its back unless ei-
ther a roll film holder or the back protective
cover is attached. This is necessary to pre-
vent damage to its various spring loaded
function pins.