Filter
Top Products
116
SETTING THE DATE AND TIME
When taking a picture, the date and time are recorded as the part of the image
information. If the built -in clock of this camera is not set correctly, the wrong date
and time are recorded. Set the date and time correctly by performing the proce-
dure below.
Rotate the function dial to and
slide the power switch to turn on the
camera.
• The power switch returns to the initial
position.
1
Rotate the function dial to “SETUP”.
• The setup mode menu is displayed on the
LCD monitor as shown in the figure.
2
LCD BRIGHT 7
POWER SAVE 10 MIN.
FORMAT
DATE 2000/08/30
TIME 17:33
BEEP ON
VIDEO OUT NTSC
LANGUAGE ENGLISH
DEFAULT