Filter
Top Products
14
GETTING UP AND RUNNING
GETTING UP AND RUNNING
Changing the CR-V3 battery
Insert the battery.
• The CR-V3 battery must be inserted with the battery terminals
first.The flat side of the battery should face the front of the
camera. If the battery does not fit, check its orientation. Never
force the battery.
This digital camera uses one CR-V3 lithium battery.When replacing the batteries,
the mode dial should be in the off position.
1
2
Open the battery-chamber door by sliding the door toward the bottom of the cam-
era (1) to release the safety catch; the door can then be opened(2).
Close the battery-chamber door (3) and slide it toward the top of
the body (4) to engage the safety catch.
• After installing the battery, the set-time/date message may
appear on the monitor.The clock and calendar are set in the
custom 2 section of the setup menu (p. 96).
3
4