Filter
Top Products
50
Individual focus areas can be selected. Press and hold the controller (1) until the
Area-AF frame lines change to the spot-focus-area display. Press and hold the con-
troller again to return to the Area-AF frame lines.
AUTO-RECORDING MODE
Focus area selection
Once a focus area is selected, it will remain active even after the picture has been taken. Only when
one focus area is displayed, can the controller be used to zoom (p. 24).
3
1
Use the four-way key of the controller (2) to highlight the
desired autofocus area; the active area is blue.
2
4
Press and hold the central button of the controller for about one second to return to
the Area AF focus frames. The use another focus area, repeat the procedure.
Press the shutter-release button part-
way down (3) or press the center of
the controller (4) to select the area;
the other four areas will disappear.
Focus and exposure is locked. Press
the shutter-release button all the way
down to take the picture.