64
MULTI-FUNCTION RECORDING
This camera has autofocus and manual focus control.The focus mode is set in the custom 1 section
of the multi-function recording mode menu (p. 56).
Autofocus will produce excellent results in almost every situation, however, under certain conditions,
the autofocus system will not work accurately; see special focusing situations on page 27. In these
situations the camera can be manually focused.
Focus modes
Single-shot AF
Subject Tracking AF
Single-shot AF focuses on the subject and locks the focus position.This focus mode is ideal for static
subjects. Because the focus is locked when the shutter-release button is pressed partway down, sin-
gle-shot AF can be used when the subject is outside the focus frames, or when a special focusing
situation is preventing the autofocus system from focusing. For more on focus lock, see page 51.
Focus Area Selection (p.50) and the self-timer/remote control drive mode (p. 42) use single-shot AF.
Place the subject within the Area-AF focus frames and press the shutter-release button partway
down; Subject Tracking AF will lock onto the subject and follow the subject’s movement in three-
dimensional space through the focus area.With the camera stationary, subject tracking AF can follow
a subject moving approximately 14.5 km/h (9 mph) toward or away from the camera and 5.4 km/h
(3.4 mph) left or right at 3.5 m (12 ft) at the wide-angle lens position or at 10 m (33 ft) at the telepho-
to position. 14.5 km/h (9 mph) is equivalent to a child running, and 5.4 km/h (3.4 mph) is equivalent
to someone walking quickly. This is the primary focus mode in the auto-recording mode.
Subject Tracking AF will automatically switch to single-shot AF under very low lighting conditions.
Single-shot AF is used with Focus Area Selection (p. 50), the self-time/remote control drive mode (p.
42), and the digital zoom, or when the monitor is turned off (p. 31).