Multiquip BP-25H CE Camera Accessories User Manual


 
BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV. #4 (12/19/07) — PAGE 9
BP-25H CE GASOLINE VIBRATOR — RULES FOR SAFE OPERATION
The engine of this vibrator requires an adequate free flow of
cooling air.
NEVER!
operate the vibrator in any enclosed or
narrow area where free flow
of the air is restricted. If the
air flow is restricted it will
cause serious damage to the
vibrator or engine and may
cause injury to people and
property. Remember the
engine gives off DEADLY
gases.
NEVER operate the equipment in an explosive atmosphere
or near combustible materials. An explosion or fire could result
causing severe
bodily harm or even death.
Topping-off to filler port is dangerous, as it tends to spill fuel.
Refer to the
Engine Owner's Manual
for engine technical
questions or information.
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
Manufacturers do not assume responsibility for any accident
due to equipment modifications.
NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to
cool before servicing engine.
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot!
components can cause serious burns.
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
ALWAYS use extreme caution when
working with flammable liquids. When
refueling, stop the engine and allow it
to cool. DO NOT
smoke around or near
the machine. Fire or explosion could
result from fuel vapors, or if fuel is spilled
on a hot engine.
The following safety guidelines should always be used when
operating the
vibrator.
GENERAL SAFETY
DO NOT operate or service this equipment
before reading this entire manual.
This equipment should not be operated by persons under 18
years of age.
NEVER operate this equipment when not
feeling well due to fatigue, illness or taking
medicine.
NEVER operate this equipment under the influence or drugs or
alcohol.
Whenever necessary, replace nameplate, operation and safety
decals when they become difficult read.
ALWAYS check the machine for loosened threads or bolts
before starting.
Dress properly. Wear appropriate clothing and protective safety
equipment. Wear clothing that will not likely become caught
in the equipment or snag on the forms. Eye, hand, hearing,
and foot safety equipment is required.
Failure to follow instructions in this manual may lead to
serious injury
or even
DEATH
! This equipment is to be
operated by trained and qualified personnel only! This
equipment is for industrial use only.
DANGER - READ THIS MANUAL!