Filter
Top Products
38
Symptom Cause Solution
Power Supply
Blurry or out of focus
Distance from subject is not correct.
Refer to the Specifications/Focus Range for
details.
No Power
1. Batteries not loaded correctly
2. Dead batteries
3. Wrong AC adapter
1. Reinstall batteries
2. Replace batteries
3. Use only recommended AC adapter
Sudden power failure
1. Low battery power
2. Auto Power Off function engaged
1. Replace batteries
2. Turn power back on
No capture when
shutter is pressed
1. Operation Mode Selector set to
Playback mode.
2. Memory is full.
1. Set Operation Mode Selector to Camera mode.
2. Delete images.
Inaccurate color
capture
1. Indoor fluorescent lighting
2. Indoor incandescent lighting
3. Outdoor natural lighting
1. Change White balance to Indoor+ setting.
2. Change White balance to Indoor- setting.
3. Change White balance to Outdoor setting.
** We recommend using Auto White Balance**
Image is too dark
Not enough light
1. Change Iris setting to (F2.8)
2. Use the flash (see Chapter 2)
Image is too bright
1. Strong direct or reflected light
2. Subject is too close to use flash and
large (F2.8) iris setting
1. Change Iris setting to (F8.0)
2. Change Iris setting to (F8.0)
** If using flash and subject is further than 1.2
meters set Iris to (F2.8) **
Redeye
Reflection of light (flash) off the retina of
the human eye
Change the Flash to 1 of 2 Redeye settings
*On-
*Auto-