Chapter 5 Performing Machine Vision Tasks
IMAQ Vision for Visual Basic User Manual 5-32 ni.com
• DrawRectangle—Overlays a CWIMAQRectangle object on an
image.
•
DrawOval—Overlays a CWIMAQOval object on an image.
•
DrawArc—Overlays a CWIMAQArc object on an image.
•
DrawPicture—Overlays a picture object onto the image.
•
DrawText—Overlays text on an image.
•
DrawRegions—Overlays an ROI described by the CWIMAQRegions
object on an image.
Tip You can select the color of overlays by using one of these methods. If you do not
supply a color to an overlay method, the
CWIMAQOverlay.DefaultColor property
is used.
You can configure the following CWMachineVision methods to overlay
different types of information about the inspection image:
•
FindStraightEdge
• FindCircularEdge
• FindConcentricEdge
• MeasureMaximumDistance
• MeasureMinimumDistance
• FindPattern
• CountAndMeasureObjects
• FindCoordTransformUsingRect
• FindCoordTransformUsingTwoRects
• FindCoordTransformUsingPattern
You can overlay the following information with all the above methods
except
CWMachineVision.FindPattern:
• The search area input into the method
• The search lines used for edge detection
• The edges detected along the search lines
• The result of the method
Each of the above CWMachineVision methods has a settings object input
that allows you to select the information you want to overlay. Set the
boolean property that corresponds to the information you want to overlay