Nikon 13216 Digital Camera User Manual


 
59
Mode M (Manual)
In manual mode, you control both shutter speed and aperture.
To take photographs
in manual mode:
1 Rotate the mode dial to M.
2 Choose aperture and shutter speed.
Checking the exposure indicator (see below), adjust shutter speed and
aperture.
Shutter speed is selected by rotating the command dial: choose from
values between 30 s and
1
/4000 s or select “Bulb” or “Time” to hold the shutter
open indefinitely for a long time-exposure (0 60).
Aperture is selected by
rotating the command dial while keeping the E (N ) button pressed: choose
from values between the minimum and maximum for the lens.
Shutter speed
and aperture are shown in the viewfinder and information display.
3 Frame a photograph, focus, and shoot.
Shutter speed Aperture
Command
dial
E (N) button Command
dial
A The Exposure Indicator
If a CPU lens is attached (0 199) and a shutter speed other than “Bulb” or “Time” is selected,
the exposure indicator in the viewfinder and information display shows whether the
photograph would be under- or over-exposed at current settings (the display varies
depending on the options selected for Custom Settings b1, EV steps for exposure cntrl and
f5, Reverse indicators; 0 159, 166).
If the limits of the exposure metering or live view
exposure control system are exceeded, the indicator will flash.
Optimal exposure Underexposed by
1
/3EV Overexposed by over 2 EV
Mode dial