Nikon 1 V2 Black Digital Camera User Manual


 
189
n
Shooting (All Modes)
The camera takes time to turn on: Delete files or format the memory card.
The shutter-release is disabled:
The battery is exhausted (0 12, 21).
The memory card is locked (0 15) or full (0 21).
The flash is charging (0 69).
The camera is not in focus (0 24).
You are currently filming a slow motion movie (0 51).
Only one picture is taken each time the shutter-release button is pressed in continuous
release mode: 5 fps is selected for Continuous and the built-in flash is
raised.
The camera does not focus automatically:
The subject is not suited to autofocus (0 150).
The camera is in manual focus mode (0 149, 151).
Focus does not lock when the shutter-release button is pressed halfway: Use the 1
(A) button to lock focus when AF-C is selected for focus mode or when
photographing moving subjects in AF-A mode (0 149, 154).
Focus area selection is unavailable: Focus area selection is not available in
auto-area AF (0 153) or face priority (0 27). In other AF-area modes, the
focus area can be selected by pressing J.
Subject-tracking AF not available: Select a non-monochrome Picture Control
(0 136, 153).
AF-area mode selection is unavailable: The camera is in auto or best moment
capture mode (0 41), manual focus mode is selected (0 149), or the h
Scene auto selector is used (0 122).
Image size selection is unavailable: NEF (RAW) is selected for image quality
(0 123).
The camera is slow to record photos: Turn long exposure noise reduction off
(0 146).
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos:
Lower ISO sensitivity or enable high ISO noise reduction (0
146).
Use long exposure noise reduction at shutter speeds slower than 1 s
(0 146).
No photo taken when ML-L3 remote control shutter-release button is pressed:
Replace battery in remote control (0 170).
Choose a remote control mode (0 63).
The remote control standby timer has expired (0 163).
The remote is not pointed at the camera or the infrared receiver is not
visible (0 2, 66).
The remote is too far from the camera (0 66).
Bright light is interfering with remote.