Nikon 1 V2 Black Digital Camera User Manual


 
194
n
*See the printer manual for more information.
Failed to update
speedlight firmware.
Try again after turning
the camera off and on.
Turn the camera off and then on again
and reattempt the update. If the prob-
lem persists or reoccurs frequently,
contact a Nikon-authorized service
representative.
Failed to update lens
firmware. Try again
after turning the
camera off and on.
Turn the camera off and then on again
and reattempt the update. If the prob-
lem persists or reoccurs frequently,
contact a Nikon-authorized service
representative.
An error has occurred.
Press the shutter-
release button again.
Press the shutter-release button. Con-
tact a Nikon-authorized service repre-
sentative if the problem persists or re-
occurs frequently.
An error has occurred
in the internal circuitry.
Try again after turning
the camera off and on.
Turn the camera off and then on again.
If the problem persists or reoccurs fre-
quently, contact a Nikon-authorized
service representative.
The camera’s internal
temperature is high.
The camera will now
turn off.
Wait for the camera to cool. xvi
Memory card contains
no images.
To view pictures, insert a memory card
containing images.
14
Cannot display this file.
The file has been created or modified
on a computer or different make of
camera, or is corrupt.
Check printer. Check the printer.
*
Check paper.
Select Resume after loading paper of
the correct size.
*
Paper jam. Clear the jam and select Resume.—
*
Out of paper. Insert paper and select Resume.—
*
Check ink supply. Select Resume after checking the ink.
*
Out of ink. Replace the ink and select Resume.—
*
Message Solution 0