Filter
Top Products
67
t
A
Movie Mode
In self-timer mode, start and stop the timer by pressing the movie-
record button instead of the shutter-release button. In remote control
mode, the ML-L3 shutter-release button functions as the movie-record
button for advanced movie mode (0 49).
A
Using a Flash
When using the built-in flash, press the N button to raise the flash
before shooting. Shooting will be interrupted if the flash is raised while
the self-timer or delayed-remote timer is counting down.
In remote control mode, the flash starts charging while the camera is
waiting for the signal from the remote. The camera will only respond to
the shutter-release button on the remote control when the flash is
charged. If red-eye reduction (0 69) is used when Quick response is
selected for Remote control in the setup menu (0 163), the shutter
will be released about 1 second after the red-eye reduction lamp lights.
If 2 s delay is selected, there will be about a 2 second delay after the
shutter-release button on the remote control is pressed; the red-eye
reduction lamp will then light for about 1 second before the shutter is
released.
A
See Also
For information on choosing how long the camera will wait for a signal
from the remote, see page 163. See page162 for information on choos-
ing the shutter-release delay in self-timer mode.