Filter
Top Products
153
r
4 Press J.
Press J to save changes and return to
the shooting menu.
If a value other
than 0 is selected for the green (G)–
magenta (M) axis, an asterisk (“U”) will
be displayed in the control panel.
The U Button
The U button can be used to select the color temperature for the
amber (A)–blue (B) axis only.
Press the U button and rotate the
sub-command dial until the desired value is displayed in the
control panel (adjustments are made in mireds; 0 150). To enter a
color temperature directly in increments of 10 K., press the U
button and press 4 or 2 to highlight a digit and press 1 or 3 to
change.
U button Sub-command dial
Control panel
D Choose Color Temperature
Note that the desired results will not be obtained with flash or
fluorescent lighting.
Choose N (Flash) or I (Fluorescent) for these
sources.
With other light sources, take a test shot to determine if the
selected value is appropriate.
J button