Filter
Top Products
318
U
Selecting Ye s allows adjustments that are normally made by
holding the I (Q), E, M (Y), D, S, T, U, or AF-mode
button and rotating a command dial to be made by rotating the
command dial after the button is released (this also applies to the
Fn and depth-of-field preview buttons if they have been assigned
Active D-Lighting using Custom Setting f4, Assign Fn button;
0 314, or Custom Setting f5, Assign preview button; 0 315).
Setting ends when any of the affected buttons is pressed again or
the shutter-release button is pressed halfway.
Except when No
limit is selected for Custom Setting c2 Auto meter-off delay,
setting will also end when the exposure meters turn off.
Menus
and
playback
If Off is selected, the multi selector is used to choose the
picture displayed during full-frame playback, highlight
thumbnails, and navigate menus.
If On or On (image review
excluded) is selected, the main command dial can be used to
choose the picture displayed during full-frame playback, move
the cursor left or right during thumbnail playback, and move
the menu highlight bar up or down.
The sub-command dial is
used to display additional photo information in full-frame
playback and to move the cursor up or down during thumbnail
playback.
Select On (image review excluded) to prevent the
command dials from being used for playback during image
review. While menus are displayed, rotating the sub-
command dial right displays the sub-menu for the selected
option, while rotating it left displays the previous menu.
To
make a selection, press 2, the center of the multi selector, or
J.
f10: Release Button to Use Dial
G button ➜ A Custom Settings menu
Option Description