Nikon 26377 Digital Camera User Manual


 
110
Using the Wi-Fi (Wireless LAN) Feature
3 Set the Wi-Fi setting on the smart device to On.
Check the user’s manual provided with your smart device for further details.
After the network name (SSID) that can be used for the smart device is displayed, select the
SSID displayed on the camera.
When the message for entering a password (A110) is displayed, enter the password that is
displayed on the camera.
When the camera is successfully connected to a Wi-Fi network, the shooting screen is
displayed with the Wi-Fi icon (A9).
4 Start the dedicated software installed on the smart device.
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, retry the Wi-Fi network
setting.
To Terminate the Wi-Fi Connection
Turn off the camera.
Set the Wi-Fi setting on the smart device to Off.
B Notes About Wi-Fi Connection
Set the Wi-Fi network to Off in a place where the use of radio waves is prohibited.
When a memory card is not inserted in the camera, the Wi-Fi feature cannot be used. When Eye-Fi
card (E106) is inserted in the camera, the Wi-Fi feature cannot be used.
When Wi-Fi is connected, Auto off is disabled.
When the Wi-Fi network is set to On, the battery will drain faster than normal.
The Wi-Fi network cannot be selected when the battery level indicator in the monitor indicates
B. In addition, if the battery level indicator indicates B while a Wi-Fi connection is established,
the connection is terminated.
C Notes About Security Settings
If the camera is installed with the Wi-Fi feature without proper security settings (encryption and
password), unauthorized third parties may access the network and cause harm. We strongly
recommend performing the required security settings before using the Wi-Fi feature.
Use Wi-Fi options of the setup menu (A105) to perform the security settings.