Filter
Top Products
E86
Reference Section
To Erase Log Data
Press the l button in step 1 to select either function.
• Selected log: The selected log data is erased.
• All logs: All log data stored on the memory card is erased.
C Location Information Log Data
Log data is NMEA format-compliant. However, display in all NMEA format-compliant
software or on all NMEA format-compliant cameras is not guaranteed.
Set Clock from Satellite
Signals from the positioning satellites are used to set the date and time of the
camera’s internal clock. Check the positioning status before setting the clock
using this option.
B Notes About Set Clock from Satellite
• To set the camera’s internal clock, positioning must have been done successfully
(A85).
• Date/time adjustment by Set clock from satellite is set according to the time
zone set in Time zone and date (A83, E64) of the setup menu. Check the
time zone before setting Set clock from satellite.
• The date/time set using Set clock from satellite is not as accurate as radio clocks.
Use Time zone and date in the setup menu to set the time if it is not accurate in
Set clock from satellite.
Press the d button M z (location data options) menu icon M Set clock
from satellite M k button