Filter
Top Products
E94
Reference Section
No access.
The camera could not receive the
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
94,
E89
Could not connect.
The camera failed to establish the connection
while receiving the communication signals
from the smart device. Select a different
channel in Channel in Options in the Wi-Fi
options menu and establish the wireless
connection again.
94,
E89
Wi-Fi connection
terminated.
A cable was connected to the camera while the
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera
and establish the wireless connection again.
94,
E89
Lens error
A lens error occurred.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
20
Communications
error
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
E22
System error
An error occurred in the camera’s internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
10, 20
Display Cause/Solution A