Nikon 26469 Digital Camera User Manual


 
12
The Basics of Shooting and Playback
1 Prepare the included charging AC adapter.
If a plug adapter* is included with your camera, attach the
plug adapter to the plug on the charging AC adapter.
Push the plug adapter firmly until it is securely held in
place. Once the two are connected, attempting to
forcibly remove the plug adapter could damage the
product.
* The shape of the plug adapter varies according to the
country or region in which the camera was purchased.
This step can be omitted if the plug adapter comes
permanently bonded to the charging AC adapter.
2 Make sure the battery is installed in the camera, and then
connect the camera to the charging AC adapter in order of
1 to 3.
Keep the camera turned off.
Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
B Notes
Do not use a USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
The charge lamp slowly flashes green to indicate that the battery is charging.
Preparation 2 Charge the Battery
Charge lamp
Electrical outlet
USB cable (included)