Filter
Top Products
E109
Reference Section
Could not connect.
The camera failed to establish the connection
while receiving the communication signals
from the smart device. Select a different
channel in Channel in Options in the Wi-Fi
options menu and establish the wireless
connection again.
E50,
E93
Wi-Fi connection
terminated.
The Wi-Fi connection is terminated in the
following situations:
• When the signal strength is insufficient
• When the battery level is low
• When a cable or memory card was removed
and inserted
Use a sufficiently charged battery, disconnect
the TV, computer and printer, and then
establish the wireless connection again.
E50,
E93
Lens error. Try again
after turning the
camera off and on.
If the error persists, contact your retailer or
Nikon-authorized service representative.
–
Communications
error
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
E54
System error
An error occurred in the camera’s internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
F7
Display Cause/Solution A