Filter
Top Products
Reference Section
E7
• When you point the camera at a dog or cat, the camera detects the pet’s face and
focuses on it. By default, the shutter is automatically released when the camera
detects a dog or cat face (pet portrait auto release).
• On the screen displayed when O Pet portrait is selected, select U Single or V
Continuous.
- U Single: Whenever the camera detects a dog or cat face, the camera captures
1 image.
- V Continuous: Whenever the camera detects a dog or cat face, the camera
captures 3 images continuously.
B Pet Portrait Auto Release
• Press the multi selector J (n) to change the Pet portrait auto release settings.
- Y: When the camera detects a dog or cat face, the camera automatically
releases the shutter.
- k: The camera does not release the shutter automatically, even if a dog or cat
face is detected. Press the shutter-release button. The camera also detects
human faces when k is selected.
• Pet portrait auto release is set to k after 5 bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the
camera acquires focus on a face displayed inside a
double border (focus area), the double border
changes to green. If no faces are detected, the
camera focuses on the subject in the center of the
frame.
• Under some shooting conditions, the pet face
may not be detected and other subjects may be
displayed inside a border.
y M O Pet portrait
25
m
0s
25
m
0s
880
880
1/250
1/250
F3.7
F3.7