Filter
Top Products
70
P
❚❚Setting the Depth Gauge to Zero
Follow the steps below to set the depth gauge to zero.
1
Select Alt./depth correction.
2
Select Correct manually.
3
Set the depth gauge to zero.
In the setup menu, select Altitude/
depth options, then highlight Alt./
depth correction and press 2.
Highlight Correct manually and press
2.
Press 4 or 2 to highlight digits and
press 1 or 3 to change. Press J
when changes are complete.
A
See Also
For information on altitude and depth options, see page 101.