Filter
Top Products
14
Camera Operation
Camera Operations
Turning the Camera on and Off
To turn the camera on, press the power switch. The power-on lamp will light.
To turn the camera off , press the power switch and wait for the power-on lamp to
turn off .
Turning the Camera on (Playback Mode)
If the button is pressed for about a second when the camera is off , the camera will turn
on in playback mode ( 43).
Auto Power off (Stand-by Mode)
In shooting mode, the monitor will dim to reduce the drain on the battery if no operations
are performed for about fi ve seconds. The monitor will brighten when camera controls are
used. At default settings, the monitor will turn off altogether if no operations are performed
for about a minute during shooting and playback (stand-by mode; 88). The camera will
turn off automatically if no operations are performed for another three minutes.
The monitor will turn on.
Power switch
Power-on lamp
On Camera on.
Blinks Monitor has turned off to save power (see below).
Flickers Battery exhausted. Recharge or change battery.
Off Camera off .
Internal memory/memory card indicator ( 12)
Pictures will be recorded to internal memory.
Pictures will be recorded to memory card.
Shooting mode
( 5, 18, 26, 32, 35)
Number of exposures remaining ( 102)
Image mode ( 74) Flash mode ( 20)
Battery indicator
NO ICON Battery fully charged.
Low battery; prepare to recharge or change battery.
WARNING!! BATTERY
EXHAUSTED
Battery exhausted. Recharge or change battery.