Filter
Top Products
88
The Setup Menu
AF Assist
If Auto is selected, AF-assist illumination will be used to assist the focus operation
when the subject is poorly lit (AF-assist illumination is unavailable in some modes;
26–34). Choose Off to disable AF-assist illumination (note that the camera may
be unable to focus if lighting is poor).
Sound Settings
Adjust the following sound settings:
Option Description
Button
sound
When On is selected, beep will sound once when operations are completed suc-
cessfully, three times when error is detected.
Shutter
sound
Choose sound played when shutter is released (note that shutter sound may not
always play; 97). Choose Off to disable shutter sound.
Volume Choose volume from Loud, Normal, and Off .
Blur Warning
Choose whether or not the blur warning is displayed (
21). Note that the warning
may not always be displayed ( 97).
Auto Off
Choose the time before the monitor turns off automatically to save power from
30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless
of the option chosen, the monitor will remain on for 3 minutes when menus are
displayed, and for 30 minutes when Loop is selected during Pictmotion or slide
show playback or the camera is powered by the supplied AC adapter. While the
monitor is off , the power-on lamp will blink. The camera will turn off automatically
if no operations are performed for another three minutes.