Filter
Top Products
149
The Setup Menu
Basic Camera Setup
3 Tap o.
The time zone selection screen is displayed.
4 Tap E or F to choose the travel
destination time zone and tap I.
If daylight saving time is in effect, tap p to
enable daylight saving time function. W is
displayed at the top of the monitor and the
camera clock is advanced one hour. Tapping
p again to disable the daylight saving time
function.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2, and complete steps 3 and 4.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
D Imprinting Date on Pictures
Enable date imprint from the Date imprint option (A152) in the setup menu after the date and
time have been set. When the Date imprint option is enabled, pictures will be recorded with
shooting date imprinted on them.
1115 2010 1530
:
Time zone
London, Casablanca
Home time
zone
Travel
destination
EDT:
New York
Toronto
Lima
11 30
:
04 00
:
-
Travel destination