Filter
Top Products
75
Shooting Smiling Faces (Smart Portrait Mode)
More on Shooting
C Settings in Smart Portrait Mode
There are functions with which this setting cannot be enabled. See “Camera Settings That cannot be
Applied Simultaneously” (A 76) for more information.
4 y Blink proof
When On is selected, the camera
automatically releases the shutter twice
each time a picture is taken. Of the two
shots, one in which the subject’s eyes are
open is saved.
• If the camera saved a picture in which
the subject’s eyes may have been
closed, the dialog shown at right is
displayed for a few seconds.
• When On is selected, the flash is disabled.
• The default setting is Off.
5 a Smile timer
• On (default setting): The camera uses face detection to detect a human face, and
then automatically releases the shutter whenever a smile is detected.
• Off: The camera does not release the shutter automatically with smile detection.
Press the shutter-release button to take a picture.
6 o Exposure compensation
Adjust Exposure compensation (A 47) with shooting in smart portrait mode.
A blink was detected in the
picture just taken.