Filter
Top Products
I
Mounting
and
removing
the
lens
Only the Nikkor lenses which are listed
in
the usability chart can
be used with the
E2
/E2s. (See pages 75-76.)
-Be
sure
to
set
the Main dial to
L.
(See
page
34.)
-Be
careful
not
to touch, smear or damage the CPU contacts as this
may
cause the camera
to
malfunction.
If
this occurs, clean the contacts wi
th
a
soft, clean,
dry
cloth.
1
Removing the body cap
Rotate the body cap clockwise to remove.
2
Mounting the lens
Mount the lens by aligning the
distance/aperture index line
on
the lens with
the lens mounting index
on
the camera.
Rotate the lens counter-clockwise until it
locks into place.
-
00
not
press the lens release button when
mounting the lens.
Removing the lens
Depress and hold the lens release button;
securely grip the lens and rotate it
clockwise,
in
the direction of the arrow.
When leaving the camera without a lens
Attach the body
cap
to the camera body; align the indexes
on
both the cap
and the body, and rotate the cap counter-clockwise as far
as
it
will go.
If the lens release button remains stuck in the pressed position
Make
su
re you rotate the lens until the lens release button returns back
to
the normal position with a click.
20