Filter
Top Products
I
Setting
the
focus
mode
This camera provides two autofocus
modes-Single
Servo
Autofocus
(S)
and Continuous Servo Autofocus
(C)-
and a
Manual Focus mode (M) selected by setting the focus mode
selector to
S,
Cor
M.
S : Single Servo Autofocus
Lightly press the shutter release
button; the shutter can only be
released when the subject is in
focus and the in-focus
indicator.
appears
in
the viewfinder, as the
priority is
on
correct focus. After
focus is achieved, it remains locked
for as long as the shutter release
button remains lightly pressed.
Remove your finger from the
shutter release button once and
lightly press the button again when
you wish to refocus on a different
subject.
-If
the shutter release button
is
fully
depressed from the start, the lens starts
adjusting for focus and the shutter
is
released as soon as the subject
is
in
focus.
With
E2s
camera, both focus
and
exposure
are locked.
C : Continuous Servo Autofocus
42
The shutter can be
re
leased anytime,
regardless of focus status, since the
priority
is
on
shutter release. The
camera continues focusing for
as
long
as
you keep t
he
shutter
re
lease button
lightly pressed, even when the in-focus
indicator . appears
in
the viewfinder.
-In
Continuous Shooting mode (the Main
dial
is
set to C), the lens adjusts focus for
the first frame only, then the focus
is
locked when continuous shooting starts.