Filter
Top Products
Setting
and
checking
date
and
time
You
can check the current data by pushing the DATE button.
The display
in
th
e LCD panel changes
in
th
e following order:
Year, Month, Day, Hou
r,
and Minute as you push the DATE
button.
To
correct the data, adjust
in
the following way.
-You
cannot check
and
adjust the data when the Main dial
is
set
to
PB
.
1
Press the shutter release button
halfway and push the DATE button.
Push the DATE button for at least one
second
so
that the "year"
se
ction starts to
blink. Next remove your finger from the
shutter release button.
2
Rotate the command dial to set the
correct "year" and push the DATE
button.
Rotate the command dial counter-clockwise
to
increase the setting value
s,
and rotate
clockwise to decrease the setting values.
Then push
th
e DATE button again, and the
"month" section starts to blink.
3
Follow the same procedure to set the "month," "day," "hour"
and "minute."
Rotate the command dial
to
set the correct "month
",
"day
,"
"hour" and
"minute
,"
and push the DATE button. When the "minute"
is
set and the
DATE
button
is
pushed, the clock starts working.
-
The
clock only starts working from 00 sec. when the "minute" setting
is
corrected.
-
If
the camera
is
left untouc
hed
in the date/time setting mode for more than
90 seconds, the LCD panel returns
to
the normal display mode.
-If
the shutter
is
released while date/time setting
is
in progress, the
date/time setting mode will be canceled,
and
all data set will be invalid.
23
I