Filter
Top Products
E63
GPS Options Menu (COOLPIX S9500 only)
Reference Section
B Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log recording. When the
battery power becomes exhausted, log recording ends.
• Log recording ends due to the operations below even when there is time remaining for log
recording.
- The USB cable is connected.
- Record GPS data in GPS options is set to Off (same as when Reset all is performed).
- The setting of the internal clock (time zone or date and time) is changed.
• Even when the camera is turned off, log recording is continuously performed until the preset time
has elapsed if there is still time remaining for log recording.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• See "GPS Log Data Saved on Memory Cards" (E98) for more information.
C To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 4.
• To erase the log data that is stored on the memory card, press the l button in View log (E64).