Filter
Top Products
6
Lightly press shutter release button to start autofocus
operation and switch exposure meter on.
With a stationary subject, confirm that the in-focus indicator .
appears on the viewfinder's LCD readout. With a moving
subject, confirm that Focus Tracking indicator
••
appears.
Confirm, too, that the shutter speed and aperture indications
are shown inside viewfinder. (Exposure readouts also appear
in
the camera's extemal LCD paneL)
• If • appears, subject
is
located closer than the lens' closest
focusing distance. Move away from the subject and refocus.
• If . • blinks
in
the viewfinder, autofocus
is
not possible
(p.38).
22
Note
on
Single Servo AF with a stationary subject
After focus
in
g
is
achieved and in-focus
in
dicator .
appears, focus is locked
as
long
as
the shutter release
button
is
lightly pressed.
If
the distance between you
and the stationary subject changes, remove your finger
from shutter release button, then lightly press it again to
refocus.
For details about Single Servo
AF,
see page 32.