Filter
Top Products
SELF-
TIMER
OPERATION
+
1
Press self-timer
(SETI'::»
button and confirm that.::> starts
blinking
in
LCD panel. While pressing
SETI'::>
button, rotate
command dial one click so
that.::>
stops blinking. Then remove
finger from
SET/'::>
button.
• To cancel self-timer, press
SET/'::>
button and rotate command
dial so that.::> disappears.
2
Look through the viewfinder, lightly press shutter release
button, and confirm focus and exposure.
3
Fully depress shutter release button. The self-timer LED
starts blinking. The shutter will release after 10 seconds.
The self-timer LED blinks for eight seconds, then stops blinking
to
tell you get ready for the shot.
To cancel self-timer operation before shooting: Turn the
camera's power off.
• When using any Auto exposure mode, attach the
eyepiece cover (provided)
to
the viewfinder eyepiece
before setting self-timer. The eyepiece cover prevents
stray light from entering viewfinder and affecting
exposure.
•
In
Single Servo
AF
mode, self-timer operates only when
in-focus indicator
(e) appears inside viewfinder.
• Regardless
of
film advance mode setting, continuous
shooting is not performed.
• At
owl b setting, shutter will release at around
1/30
sec.
83