Filter
Top Products
160
Setup Menu
Basic Camera Setup
g Vibration Reduction
Specify the vibration reduction setting for taking still pictures. Correct blur, caused
by slight hand movement known as camera shake, that commonly occurs when
shooting with zoom applied or at slow shutter speeds.
When the camera is stabilized for still picture shooting with a tripod, set vibration
reduction to Off.
When vibration reduction is enabled, the current setting is displayed during
shooting (when Off is selected, an icon for the current setting is not displayed)
(A8, 27).
D Compensating Movies with Electronic VR
To reduce the effects of camera shake when recording movies, enable Electronic VR (A136) from
the movie menu (A132).
Press the d button M z (Setup menu) (A153) MVibration reduction
On (hybrid)
Records with optical compensation for camera shake during still picture recording
using the image sensor shift method, and under the following conditions, also
performs electronic VR using image enhancement.
• When the flash does not fire
• When the shutter speed is slower than 1/60 second
• When the self-timer is off
• When Single is selected for the Continuous setting
• When Off is selected for the Auto bracketing setting
• When the ISO sensitivity is 200 or less
On (default setting)
Compensates for camera shake during still picture recording using the image
sensor shift method. Camera automatically detects the panning direction and only
corrects for vibration due to camera shake.
When the camera is panned horizontally, for example, vibration reduction only
reduces vertical shake. If camera is panned vertically, vibration reduction only
compensates for horizontal shake.
Off
Vibration reduction is not enabled.