Filter
Top Products
137
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
When transferring images to the computer from the camera, select the Interface
setting (A 155) from the setup menu and set the USB option to MTP/PTP.
• The default setting is MTP/PTP.
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 Turn on the camera.
When properly connected, the PictBridge startup screen
(
1
) will be displayed in the camera monitor, followed by
the Print selection screen (
2
).
B Connecting the USB Cable
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and
do not use force when connecting or disconnecting the USB cable.
Print selection
44
1115 2010
12